润滑科技信息平台

Effect of rare earth La2O3 on the microstructure and tribological properties of laser-clad CoCrFeNiMoSi high-entropy alloy coatings

出版日期: 2023-10-13

DOI: https://doi.org/10.1016/j.matlet.2023.135398

作者: Kaitong Guo; Yaoning Sun; Wangjun Cheng;

In this study, CoCrFeNiMoSi and CoCrFeNiMoSi + 0.5 % La2O3 High entropy alloy (HEA) coatings were prepared by laser cladding. The microstructure was consisted mainly of body-centered cubic structure, face-centered cubic structure and intermetallic compounds of Si. The addition of rare earth La2O3 resulted in the refinement and uniformity of the CoCrFeNiMoSi + 0.5 % La2O3 HEA coating grains, leading to an increase in microhardness from 430 HV to 520 HV. Additionally, the friction coefficient decreased by 0.15 and the wear rate decreased by 2/3. These findings indicate that the appropriate addition of La2O3 has significant potential in enhancing the friction and wear performance of HEA coatings.

Microstructure and tribological behavior of CoCrFeNiMo0.2/SiC high-entropy alloy gradient composite coating prepared by laser cladding

Pub Date: 2023-10-13 DOI: https://doi.org/10.1016/j.matlet.2023.135398

[Shilin Zhang, Yaoning Sun, Wangjun Cheng, Yufeng Chen, Jin Gu, Gang Chen]

Microstructural Characterization of 1060-H24 Pure Aluminum in Shoulderless Micro Friction Stir Welding

Pub Date: 2023-10-13 DOI: https://doi.org/10.1016/j.matlet.2023.135398

[Zhang Changqing, Ma Dongdong, Gu Huaizhuang, Wang Dong, Liu Enrong, zhangpensheng]

Effect of Tool Speed on Microstructure Evolution and Mechanical Properties of Friction Stir Welded Joints of Al-Mg-Si Alloy with High Cu Content

Pub Date: 2023-10-13 DOI: https://doi.org/10.1016/j.matlet.2023.135398

[Wangzhen Li, Zhang Luo, Youping Sun, Xinyu Liu]