In order to attain improved mechanical properties of the carbon fiber (CF) reinforced polyoxymethylene (POM) composite, maleamidic acid treated carbon nanotube (CNT) was deposited on carbon fiber. The mechanical properties of composites have been investigated. The tensile strength values of the treated CF/POM composites at all CNT mixing ratios are found to be higher than that of untreated one. The surface morphologies of the fractured surfaces of the composites were recorded using scanning electron microscopy (SEM) to gain information about the fiber–matrix interfacial adhesion in the composites. The friction coefficient of all the CF/POM/CNT composites decrease as the load increases from 10 to 20 N under the same sliding speed of 1000 r/min. XPS results showed that the formation of C–O, C=O, and O–C=O based species give rise to chemical bonds of the CF and the POM.